UNIHIKER M10

The board as it appears on the Velxio canvas, with its full pin map read live from the simulator (regenerated by scripts/gen-boards.mjs, so it always matches what you can wire).

Family: Raspberry Pi (Linux) · Languages: Python on Linux

About this board

DFRobot’s UNIHIKER M10 is an education SBC — a Linux board with a built-in touchscreen — and in Velxio it runs on the same infrastructure as the Raspberry Pi family rather than as a microcontroller: a real shell, real Python, and GPIO bridged to whatever you wire on the canvas.

Because of that it is documented with the Raspberry Pi (Linux) family, not with the partner boards it sits beside in the picker.

Start here

Place the board and press Start, then wait for Linux — the Raspberry Pi family page covers the boot, the shell and the file upload panel.

The UNIHIKER needs a paid plan, the only board in the partner catalog that does — see plans.

Pins (11)

• 0
• 1
• 2
• 3V3
• GND
• P21
• P22
• P23
• P24
• SCL
• SDA

Every pin above is clickable on the canvas — click one to start a wire. Board-level behavior, quirks and example links live on the family page.